Multisteno: Difference between revisions

From Plover Wiki
(Created page with "The [https://nollelectronics.com/products/multisteno-case-and-cables-included Multisteno] is a hobbyist steno writer made by [https://nollelectronics.com/ Nolltronics]. == Use with Plover == By default, the Multisteno uses the Gemini PR protocol. See: Setting up a hobbyist writer with Plover == Layers == == Mods == === MBK key caps === The default key caps can be replaced with MBK key caps. === Spring swapping === The default springs bottom out at 25 grams of f...")
 
(add infobox)
 
Line 1: Line 1:
The [https://nollelectronics.com/products/multisteno-case-and-cables-included Multisteno] is a hobbyist steno writer made by [https://nollelectronics.com/ Nolltronics].
The [https://nollelectronics.com/products/multisteno-case-and-cables-included Multisteno] is a hobbyist steno writer made by [https://nollelectronics.com/ Nolltronics].
{{Hobbyist writer infobox|name=Multisteno|image=Multisteno-Top.png|manufacturer=[https://nollelectronics.com/ Nolltronics]|connector=USB-C|switch=Kailh Choc|stock_weight=20 grams|spring_swap=Yes: 15 grams, 12 grams|alt_key_caps=MBK|javelin=No}}


== Use with Plover ==
== Use with Plover ==

Latest revision as of 22:04, 21 July 2024

The Multisteno is a hobbyist steno writer made by Nolltronics.


Multisteno

Manufacturer: Nolltronics

Connector: USB-C

Key switch: Kailh Choc

Stock key weight: 20 grams

Spring swap: Yes: 15 grams, 12 grams

Alternative key caps: MBK

Javelin: No



Use with Plover

By default, the Multisteno uses the Gemini PR protocol.

See: Setting up a hobbyist writer with Plover

Layers

Mods

MBK key caps

The default key caps can be replaced with MBK key caps.

Spring swapping

The default springs bottom out at 25 grams of force, but can be swapped with SPRiT springs that bottom out at 20 grams.

Firmware

The Multisteno is powered by QMK.