Configuration: Difference between revisions

From Plover Wiki
No edit summary
Line 2: Line 2:
== Configuration ==
== Configuration ==


=== Configuring Your Keymap in Plover ===
=== Configuring the Machine Keymap ===
'''Configure ➪ Machine ➪ Keymap'''
'''Configure ➪ Machine ➪ Keymap'''



Revision as of 21:38, 12 February 2024

Configuration

Configuring the Machine Keymap

Configure ➪ Machine ➪ Keymap

You can remap how Plover handles keys on your machine.

The available options are affected by your system and the machine you are using.

What is a keymap?

A key map is....

Remapping Keys to Different Actions

The Key column enumerates every key that Plover can control on your machine. This is a list of all keys on the keyboard. For American steno machines, the key names will be the Ireland layout defaults (S, T, K, etc.)

The Action column is what you'd like Plover to see when the key is pressed. The available actions will change depending on which system (e.g. English Stenotype) you have enabled.

Disabling Keyboard Keys

Remapping keys is especially useful when using your keyboard as a steno machine, as you may want to set keys to no-op (short for "no operation") which will disable that key while Plover is running.

The escape key will be disabled while Plover's output is enabled with the configuration above, where the "Escape" key has been mapped to the "no-op" Action.