Multisteno

From Plover Wiki
Revision as of 17:03, 20 July 2024 by Aerick (talk | contribs) (Created page with "The [https://nollelectronics.com/products/multisteno-case-and-cables-included Multisteno] is a hobbyist steno writer made by [https://nollelectronics.com/ Nolltronics]. == Use with Plover == By default, the Multisteno uses the Gemini PR protocol. See: Setting up a hobbyist writer with Plover == Layers == == Mods == === MBK key caps === The default key caps can be replaced with MBK key caps. === Spring swapping === The default springs bottom out at 25 grams of f...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Multisteno is a hobbyist steno writer made by Nolltronics.

Use with Plover

By default, the Multisteno uses the Gemini PR protocol.

See: Setting up a hobbyist writer with Plover

Layers

Mods

MBK key caps

The default key caps can be replaced with MBK key caps.

Spring swapping

The default springs bottom out at 25 grams of force, but can be swapped with SPRiT springs that bottom out at 20 grams.

Firmware

The Multisteno is powered by QMK.

Retrieved from "https://plover.wiki/index.php?title=Multisteno&oldid=2311"