Multisteno

From Plover Wiki
Revision as of 22:04, 21 July 2024 by Aerick (talk | contribs) (add infobox)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The Multisteno is a hobbyist steno writer made by Nolltronics.


Multisteno

Manufacturer: Nolltronics

Connector: USB-C

Key switch: Kailh Choc

Stock key weight: 20 grams

Spring swap: Yes: 15 grams, 12 grams

Alternative key caps: MBK

Javelin: No



Use with Plover

By default, the Multisteno uses the Gemini PR protocol.

See: Setting up a hobbyist writer with Plover

Layers

Mods

MBK key caps

The default key caps can be replaced with MBK key caps.

Spring swapping

The default springs bottom out at 25 grams of force, but can be swapped with SPRiT springs that bottom out at 20 grams.

Firmware

The Multisteno is powered by QMK.